Elevator Cable Signal Problems

Why Does Elevator Cable Shield Damage Cause Unstable Communication Signals? In modern elevators, communication signals need to be continuously transmitted between the control cabinet, car top board, COP, HOP, door operator, and display system. The shielding layer of an elevator shielded cable is designed to reduce electromagnetic interference generated by the inverter, motor, and power […]
Escalator Trim Strip Wear & Noise

Why Do Escalator Trim Strips Become Loose, Lift Up, or Make Noise? Common Causes and Replacement Tips In an escalator, trim strips are mainly used to cover joints, secure decorative panels, and improve the overall appearance of the equipment. Although escalator trim strips are relatively simple exterior components, long-term exposure to mechanical vibration, passenger impacts, […]
Elevator Wire Rope Breakage Problems

Why Do Elevator Wire Ropes Develop Localized Broken Wires? During elevator maintenance, if broken wires are concentrated in a short section of an elevator wire rope while other sections remain relatively normal, the problem should not simply be attributed to natural aging. Localized wire breakage often indicates that the wire rope has been subjected to […]
Elevator Button Spring Fatigue Issues

Elevator Button Pressing Force Keeps Changing? Return Spring Fatigue May Be the Cause Elevator push buttons are subjected to a large number of repeated presses every day. After extended use, some buttons may feel softer or harder to press, return more slowly, or require a deeper press before they respond. In addition to wear of […]
Elevator Button Sticking Problems

Why Do Elevator Buttons Develop Uneven Pressing and One-Sided Sticking? After long-term, high-frequency use, an elevator push button may sometimes feel normal when pressed on one side but stiff on the other. In more severe cases, the button may fail to return smoothly after being pressed. This type of uneven button movement and one-sided sticking […]
Elevator Steel Belt Coating Cracks

Why Should Cracks in Elevator Steel Belt Coating Not Be Ignored? In an elevator steel belt traction system, the coating of the elevator steel belt not only protects the internal steel cords but also plays an important role in friction transmission between the belt and the traction sheave. When cracks, peeling, or localized damage appear […]
Elevator Steel Belt Edge Wear Problems

Why Do Elevator Steel Belts Become Misaligned and Develop Edge Wear? In a steel belt traction elevator, the elevator steel belt must maintain a stable running path along the steel belt sheaves. If the belt continuously shifts to one side and develops fraying, wear, or localized edge damage, it usually indicates a problem with the […]
Old Elevator Button System Modernization

Complex Wiring and Frequent Button Faults in Old Elevators? How to Rematch the Button System During Modernization After many years of operation, problems in older elevators are often not limited to worn elevator push buttons. Complex wiring modifications, inconsistent interface standards, and outdated communication methods can also create multiple potential fault points. During an old […]
Handrail Support Roller Runout & Vibration

Why Does Escalator Handrail Support Roller Radial Runout Cause Periodic Vibration? Common Causes and Solutions In an escalator handrail system, the escalator handrail support roller supports the handrail during its return movement and helps maintain a stable running path. When a support roller develops radial runout, the handrail is subjected to repeated vertical impacts, which […]
Escalator Handrail & Step Speed Problems

Old Escalator Handrail and Step Speeds Out of Sync? Check These 6 Components During Modernization After years of operation, an older escalator may develop a difference between handrail speed and step speed, causing the handrail to run slower, slip intermittently, or vibrate during operation. When escalator handrail speed becomes unsynchronized with the steps, the problem […]
Elevator Traveling Cable Signal Problems

Why Do Old Elevator Traveling Cables Develop Intermittent Signal Faults? In older elevators, the elevator traveling cable continuously bends as the car moves up and down every day. After years of operation, the internal conductors, insulation, and shielding structure may gradually suffer from fatigue and deterioration, resulting in intermittent elevator signal faults that appear and […]
Escalator Step Roller Uneven Wear

Why Does an Escalator Step Roller Develop Uneven Wear on One Side? The escalator step roller supports the step as it moves continuously along the guide track. Under normal conditions, the load should be distributed relatively evenly across the roller surface. If one side of the roller shows continuous or excessive wear, the problem may […]