At present, there are many changes that have been observed in the fields like computers, industry, as well as software. No doubt, they have contributed great progress in all various sects. By pressing or pushing the button or switch, you can call a box made up of metal or partially glass that can transport you from one floor to another with safety. In fact, an elevator is important for a building with more than four floors.

For most people, especially old people and people suffering from joint or back problems, an elevator offers convenience as well as ease. And can also make life easier for physically handicapped people. In this article, we will discuss some most important parts of an elevator. Without such parts, the elevator will not work properly or can even fail to work. Read on to know what these are:

●Elevator switch:

An elevator switch or elevator control switch (ECS) is made in order to interrupt incoming alternating current power upon receiving a signal from a fire alarm control panel (FACP) for both hydraulics as well as for cable elevators.

●Elevator inverter:

The elevator inverter learns the position and helps in carrying out control to accurately stop the elevator at the floor position requested. This can be done by simply selecting the mode in the serial communication option from the upper-level control.

●Elevator chain:

The elevator chain is used for carrying the material in bulk vertically. You might have seen this kind of chain used to carry coal, cement, or grains. They are installed at regular intervals and the chain moves continuously. The room of the elevator is held by an elevator chain in most cases.

●Elevator fan:

The fan in the elevator aids in pushing out the air from the cab when the elevator is in motion in the elevator shaft. It is an important accessory of an elevator.

●Elevator wire rope:

They are found in standard elevators which are efficiently moved up and down with the help of an electric traction motion machine that utilizes a wire rope to balance the car against the counterweights.

●Elevator buffer:

They are the safety devices which are necessary to be mounted at the base of an elevator shaft.

●Elevator encoder:

The encoder is the part of the elevator that informs the controller when the car has reached the designated floor, in the correct order.
Best supplier of elevator accessories:
If any of the above accessories will not work properly, the elevator will fail to operate. However, elevator accessories are available online. You can contact any elevator accessories supplier to get the spare parts for your elevator.