Elevator Governor Speed Problems

Product

Why Is the Elevator Governor Tripping Speed Abnormal? Spring Fatigue May Be a Contributing Factor

The elevator speed governor is a key safety device in the elevator overspeed protection system. When the elevator car reaches the specified operating conditions, the governor activates the relevant safety mechanism. If the governor spring's performance changes, it may affect the force balance of the centrifugal mechanism and alter the governor's tripping characteristics.

Elevator Governor Speed Problems

1. Why Does the Elevator Governor Spring Experience Fatigue?

1. Prolonged Mechanical Stress

During governor operation, the spring continuously contributes to the force balance of the centrifugal mechanism. Over time, the spring may lose elasticity or develop permanent deformation.

2. Repeated Mechanical Cycles

The governor sheave rotates over extended periods, while its internal moving components operate continuously. As the equipment ages, the spring and its connecting parts may experience mechanical fatigue.

3. Environmental Conditions and Corrosion

Humidity, dust accumulation in the machine room, and insufficient maintenance may cause corrosion of the governor spring, further affecting its mechanical performance.

2. Why Can Spring Fatigue Affect the Tripping Speed?

In some mechanical elevator governors, the centrifugal force generated by the centrifugal mechanism must overcome the restraining force of the spring.

When the spring's properties change, the original force balance may be altered, causing the governor's tripping speed to deviate from its specified value. The actual effect depends on the governor's design; a softer spring does not necessarily mean the governor will trip earlier.

Other issues, such as seized pivot pins, worn centrifugal weights, and abnormal bearing resistance, may also affect the governor's actual operating behavior.

3. How Should Abnormal Governor Operation Be Handled?

During elevator maintenance, the following components should be inspected:

The governor spring for deformation or corrosion

The centrifugal weights and pivot pins for smooth movement

The governor sheave grooves and governor rope condition

The bearings for abnormal resistance

The actual tripping speed against the equipment specifications

The elevator speed governor is a critical safety component. If its tripping speed is abnormal, do not attempt to adjust it by manually stretching or compressing the spring. Inspection, calibration, or replacement must be performed by qualified personnel in accordance with the manufacturer's requirements and applicable safety regulations.

4. Elevator Governor Purchasing Recommendations

When purchasing elevator safety components, confirm the governor model, rated elevator speed, tripping speed range, sheave diameter, governor rope specifications, mounting method, and compatible safety gear type.

For older elevator models, provide the nameplate information, mounting dimensions, and photos of the original component to ensure accurate matching. Do not select a replacement governor based on appearance alone.

5. A-FLY Elevator & Escalator Parts Supply

A-FLY supplies elevator speed governors, safety gear, governor tension devices, buffers, rope grippers, and related elevator safety components for elevator maintenance, repairs, and modernization projects.

We support model identification, specification matching, and project parameter verification. We also supply a wide range of elevator control system components, door system parts, traction system components, and escalator wear parts to support one-stop procurement for engineering and maintenance projects.

Conclusion

Elevator governor spring fatigue may alter the force balance of the centrifugal mechanism and affect the governor's tripping characteristics. If abnormal tripping speed is detected, the spring, centrifugal mechanism, bearings, and governor rope should all be inspected. Professional testing must be carried out in accordance with the manufacturer's requirements and applicable safety standards rather than attempting to correct the problem by adjusting the spring alone.

Tags :
A-FLY,buffers,elevator,elevator parts,elevator speed governors,governor tension devices,rope grippers,safety gear
Share This :
CONTACT US FOR ANY INQUESTIONS

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!